Differences

This shows you the differences between two versions of the page.

--- iot:outdoortemphum [2026/05/17 01:53] – [Normal Behavior] rmorgan
+++ iot:outdoortemphum [2026/05/17 02:00] (current) – [Notes / Known Issues / Quirks] rmorgan
@@ Line 15: / Line 15: @@
 | Battery Management | Adafruit Solar Lithium Ion charger | PID: 4755 |
 | Solar Panel | Adafruit 6V/2W Solar Panel-ETFE/Voltaic-P126 | PID: 5366 |
-| Battery | Adafruit Lithium Ion Battery | PID: 354 |
+| Battery | Adafruit LFP Battery | PID: 354 |
 | Cable | Adafruit STEMMA QT/Qwiic JST-SH 4-pin | PID: 4210 |
 | Cable | Adafruit 3.5/1.1mm - 5.5/2.1mm DC Jack Adapter | PID: 2788 |
@@ Line 69: / Line 69: @@
 an MQTT message and writes the data to a MariaDB table on blanca.
 ==== Notes / Known Issues / Quirks ====
-These devices use a small solar panel & 3.7v LiOn battery.  Deep sleep is used to\\
+These devices use a small solar panel & 3.7v LFP battery.  Deep sleep is used to\\
 minimize power use.  It can run multiple days with no solar input.\\
-The DC Jack adapter gets one end cut off.  Wires get soldered to battery charger.
+\\
+The DC Jack adapter gets the male end cut off.  Strip the wires and solder\\
+directly to the VBUS & GND pads on the bq24074.
 ===== Change Log =====
 | **Date**     | **Change** |
 | 2026-05-16   | Created this page |